No generator voltage

Recruit Post: 5 Location: buda, texas

My generator has passed the brush test and the polarizing test. But still does not have any voltage out put banghead

. Does anyone have any ideas Question

Or should I just go ahead and replace the generator and the voltage regulator Question

THANKS guys your advise worked! My ugly but running sand rail is up and running! banana

If I knew how post pictures I would put them in. It looks like it belongs on the movie Road Warrior. THANKS AGAIN! notworthy

Moderator Post: 140 Location: Wonderful Mesquite Texas

Replace the Voltage Regulator.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
www.thestickerguystore.com ( Stickers Add Horsepower ! )
1964 'Vert 1776, IRS, Disc Brakes
I don't judge people who don't measure up to my standards.

Administrator Post: 1259 Location: Lone Oak, Texas

Did you disconnect the generator from the regulator, and connect a jumper from DF on the generator to the generator frame. Run the engine and measure the voltage from ground to D+
on the generator.
Increasing the engine speed, the voltage should jump up to +35
volts or so @3000 RPM.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Cell # 469.422.9072

'73 Bay Camper · (T 1 conversion)
'68 Bug · (Ratty Daily Driver project)